Single row bearings inch

Contact Now

Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many,Can operate with low noise,Require little maintenance.

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

36691/36620 Single row bearings inch

21.8 50mm
Standard --

HM926747/HM926719 Single row bearings inch

Standard Steel
In Stock 0.02 KGS

52393/52618 Single row bearings inch

8500 ACBB_SR_MM_DT
0.421 1

M244249/M244210 Single row bearings inch

12mm 9.4
Open Type 26000

EE722115/722185 Single row bearings inch

Standard In Stock
2.08 145mm

LL648434/LL648415 Single row bearings inch

Open Type 56mm
110mm C3

EE170975/171400 Single row bearings inch

1.72 34000
1 175

H936349/H936310 Single row bearings inch

43.00 mm 1.00 mm
90.000 mm 11000 rpm

52393/52618 Single row bearings inch

937 Open Type
130mm In Stock

64450/64701X Single row bearings inch

211 28
Open Type Standard

74551X/74846X Single row bearings inch

133000 N 2.00 mm
2200 rpm 3200 rpm
1/5